Daktronics Rodeo Interface with Daktronics Matrix Displays Manual de usuario descargar pdf (Pagina 22)

16 Venus 7000 Connection Methods

Two RTD ports will need to be set up in the Venus 7000 software to receive information from

both the OmniSport 2000 console and DakStats 3000 Rodeo software. Typically RTD is sent

from DakStats 3000 Rodeo software to the Venus 7000 over Ethernet. In rare cases, serial

ports may be used instead.

 If the OmniSport 2000 console is connected to the Venus 7000 computer via a serial

connection, then the RTD input will be configured to the COM port that the RTD

Port (J5) is connected to.

 If the OmniSport 2000 console will send RTD over the network via DCS, the RTD

input is configured to receive timer data from the UDP socket set in DCS. Refer to

Section 2.5 for more information about configuring DCS.

Figure 19: Input/Output Settings (Using DCS)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 44 45

Sin comentarios

Daktronics Rodeo Interface with Daktronics Matrix Displays Manual de usuario Pagina 22