Daktronics Venus 1500 Controlled signs with Hy-Tek & Fini Manual de usuario descargar pdf (Pagina 1)

Daktronics Venus

1500 Controlled signs with Hy-Tek & FinishLynx Quick Guide 1

Ave Brookings, SD 57006 ED17910-Rev 1 P1153

www.daktronics.com tel (605) 697-4036 or (877) 697-1115 fax (605) 697-4444

NOTE: This reference is intended as a guide to help configure Venus 1500

controlled signs to interface with Hy-Tek’s MEET MANAGER for track and

FinishLynx photo finish system. A software key is required to use

Venus 1500 Real Time. See ED-14511 for Hy-Tek and FinishLynx settings and

configurations.

Venus 1500 Real Time with Hy-Tek

STEP 1: Connect a 9pin female to 9pin female null modem cable

from the Hy-Tek computer to the Venus 1500 computer.

STEP 2: Create an input for V1500 Real Time; to do this open

V1500 Real Time by clicking the V1500 Real Time button on the

V1500 shell shown in Figure 1. Right click on Input 2 on the screen

shown in Figure 2, and select New. Select Configure from the box

shown in Figure 3. In configuration select Serial Com Port, name it

Hy-Tek, and press OK. Select the Com Port number that the 9pin

cable is plugged into on the V1500 machine, as the port number.

Baud Rate: 19200, Data Bits: 8, Parity: None. An example is shown in

Figure 4. Press ITF on the screen in Figure 3. Click on the Down

Arrow in the upper right corner of the screen and select Browse look

in: C:\Program Files\Daktronics\Common\Input Templates\ and select

the Hy-Tek Full & Small Matrix.itf shown in Figure 5. If this file does

not show up on the list, it will need to be copied into the directory.

When complete the screen should look like Figure 5. Press Ok to

continue. Press Select Displays on the screen in Figure 3. Select the

display that the Hy-Tek data will be going to and press the Arrow to

move it into the column labeled Authorized for RTD Input, shown in

Figure 6, then press Close.

STEP 3: Test communication by sending data from Hy-Tek and

watch the green circle next to the input name shown in Figure 2. If it

blinks on and off, V1500 Real Time is receiving information from

Hy-Tek.

Figure 1: V1500 Shell

Figure 2: V1500 RT

Figure 3: Input Properties V1500 RT

Figure 4: Com Port Setup

1 2 3 4 5 6 7

Indice de contenidos

Pagina 1 - Daktronics Venus

Pagina 2

Pagina 3 - FinishLynk via Ethernet

Pagina 4

Pagina 5

Pagina 6 - Creating a Hy-Tek Sequence

Pagina 7 - Connection Methods

Comentarios a estos manuales

Sin comentarios

Daktronics Venus 1500 Controlled signs with Hy-Tek & Fini Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Software Daktronics Venus 1500 Controlled signs with Hy-Tek & Fini. Daktronics Venus 1500 Controlled signs with Hy-Tek & FinishLynx User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Daktronics Venus 1500 Controlled signs with Hy-Tek & Fini Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Software Daktronics Venus 1500 Controlled signs with Hy-Tek & Fini. Daktronics Venus 1500 Controlled signs with Hy-Tek & FinishLynx User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Software Daktronics Venus 1500 Controlled signs with Hy-Tek & Fini